Step 1. Begin by wrapping red 6/0 Uni-Thread behind the eye of a TMC 2488 hook. 
Step 2. Using the red thread, tie in three strands of extra-small UTC wire (one must be black, the other two can be silver, copper, chartreuse or olive.) Tie off thread using a whip-finish knot and cut. 
Step 3. Wrap all three strands of wire to the rear of the curved hook shank. Once you have reached where you want the midge abdomen to end, snap them all off simultaneously. It will be easy, the wire is thin. But, if you cut the wire, the tips will not lie flat to the hook shank 
Step 4. Tie on olive dun 6/0 Uni-Thread immediately behind the hook eye. Build up only a very slight thread head before tying off using whip-finish knot. Be sure to leave a small band of the original red thread showing. 
Step 5. Then use a black Sharpie marker to color the top of the olive head. 
Step 6. Use the Loon Outdoors clear UV Knot Sense to build a true pupa shape over the entire fly. 
Step 7. Harden with the Loon UV light.
Step 8. Lastly, place the finished fly into the lip of a Styrofoam cup or something similar and coat with Hard-as-Hull or another head cement. Watch Tying Video!
